|NW::||5kg||Product Size: 36x:||20.5x56.8cm|
Intelligent Negative Ion Air Purifier necklace homeesale fashionable china Reverse Osmosis water purifier
Suitable area(m2): 26-35
Product size: 36x20.5x56.8cm
|Filter Cartridge||HEPA/active carbon filter|
|Working Pressure||0.6~0.8 Mpa|
OEM welcome, MOQ: 200 units,
Logo materials: Metal aluminum label
Control system and function introduction
ON/OFF: Press this button, the purifier will work under the mode of " intelligent”.
INTELLIGENT: under this mode, the machine could choose the right working speed
depending on air quality.
PURIFIED SPEED: user could adjust the working speed.
NEGATIVE ION: press this button to start and close the ion-negative function.
CHILD LOCK: Press 5 seconds, other buttons will be locked.
SLEEPING MODE: press this button, the working speed will be slow, and other indicatior
light will be off.
TIME SETTING: user could set the work time from 1 hour to 8hours.
REPLACE: when working for 3000hours, the machine will remind to replace the filter.
Remote control use
Please use remote control in 6m, and assure no obstacle between the air purifier and
remote control, otherwise the air purifier cannot receive the sign.
Note: Please take out the insulating sheet of battery before using.
Parts and instruction
A: Front panel
B: HEPA/active carbon filter
D: Purifier body
F: Air sensor
H: Wind outlet
I: Back cover
Filter clean: The filter cannot be washed in the water, please use soft dry cloth to wipe off
the dust and other impurity every 2 months.
Filter replacement: When the light of “replace” is bright, please replace the filter.
1). Before replacement, please assure the machine is off and pull out the plug.
2) Take down the front panel, and take out the old filter.
3) Remove the packed bag of new filter and put it into the machine and install the front
4). Then press “ON/OFF”, and press the button “replace” for 3 seconds, the light of replace
will be off, the machine could work normally.
Failure and solution
|Plug is loose||Put the plug into the socket well|
|Wind inlet and outlet are clogged||Remove Obscure|
|The buttons are locked||Please “child lock” for 5 seconds|
|Front panel is not installed
well or not installed
|Install the front panel well|
|Foreign Matter enter into wind duct||Take down the front panel and filter,
put the front side downwards,
take out the Foreign Matter
1. Please confirm the voltage on the specification sheet is the same as local area voltage
before connecting the electricity.
2. If the power line is damaged, please ask professional man to replace it immediately.
3. If the plug, power line or products are damaged, please stop using it .
4. Please don’t clog the wind inlet and outlet.
Safely use precautions
Before using the product, please read this manual carefully and keep it well for future